Licensed, insured, and built for Idaho homes

Sink Installation Pocatello ID Done Right the First Time

When you need sink installation Pocatello ID homeowners can count on, our team handles the whole job: shutoff, cut, seal, and test. We install undermount, drop-in, and vessel sinks in kitchens and baths across Bannock County, and we work with quartz, granite, and laminate tops. If your old basin is cracked, leaking at the rim, or just too shallow to be useful, we can swap it in a single visit. Call +19863369053 for a same-day estimate.

Local Bathroom remodelling team in pocatello
Careful work. Honest options.
About this service

Sink Installation Pocatello ID: What the Job Actually Involves

Sink installation Pocatello ID is the trade of removing an existing basin, prepping the cabinet or countertop opening, setting the new fixture, and reconnecting the supply lines and drain so everything drains fast and seals dry. It sounds simple until you hit a seized shutoff valve, a countertop cut that is 1/4 inch off, or a drain that does not line up with the new tailpiece. We handle all of it, from the pipe wrench work under the cabinet to the silicone caulk bead on top.

Most Pocatello homes we walk into have one of three problems: a 1990s builder-grade basin that has chipped and stained, a vanity top that was cut for a smaller sink, or a slow drain that has been blamed on the sink when the real issue is a clogged drain further down the line. If you have been searching sink install Pocatello Idaho near me and getting thin answers, we give you a real scope, a real price, and a real timeline before we start. Typical 2026 pricing in this area runs $220 to $780 depending on the sink type and whether we need to modify the countertop.

  • ✓ No More Rim Leaks
  • ✓ Faster Drainage
  • ✓ Countertop-Friendly Options
  • ✓ Fixtures That Last
What's included

What Our Sink Installation Service Includes

Every sink install starts with a written scope so you know exactly what is covered. Standard work includes removal, disposal, setting the new basin, sealing, and testing. Add-ons like countertop cutting, new shutoff valves, or a new faucet are quoted up front, never tacked on after the fact.

01
✓

Old Sink Removal

We disconnect the supplies and drain, cut the old caulk line, and lift the basin out without cracking the countertop. The old sink goes in our truck, so you are not stuck with a heavy fixture in the garage.

02
✓

New Basin Set and Seal

We dry-fit the new sink, confirm the reveal with a laser level, and set it with the correct clips or mounting ring. A continuous bead of silicone caulk seals the rim, and we smooth it by hand for a clean line.

03
✓

Drain and Supply Hookup

We install the new drain assembly, connect the P-trap, and hook up the supply lines. If the existing PEX piping or copper piping is corroded, we replace that section and pressure-test it before closing up.

04
✓

Shutoff Valve Check

We test every angle stop under the sink. If a valve will not close fully or is seized, we swap it for a quarter-turn ball valve so you can shut the water off fast in an emergency.

05
✓

Leak Test and Cleanup

We fill the basin, drain it twice, and check every joint with a dry paper towel. Then we wipe the cabinet, vacuum the work area, and walk you through the shutoffs and the caulk cure time.

How it works

Our Sink Installation Process, Step by Step

You call +19863369053 or book online. We ask for photos of the existing sink, the cabinet underneath, and the countertop opening. Within a few hours you get a written price range and a scheduled window. If you need Pocatello bathroom sink installation open now, we keep same-day slots for emergency swaps.

We arrive with drop cloths and shut off the angle stops. If the valves are seized, we replace them with quarter-turn ball valves before anything else. The old sink comes out, we scrape the old putty and caulk, and we inspect the cabinet floor for water damage or soft wood. Demo takes 20 to 40 minutes.

We dry-fit the new basin, check the reveal with a laser level, and confirm the drain lines up with the P-trap. If the countertop needs a wider cut, we use a wet saw with a diamond blade and a template. For tile surrounds, we set cement backer board and a waterproofing membrane before the sink goes back in.

The sink goes in with clips, brackets, or a mounting ring depending on the model. We run a continuous bead of silicone caulk around the rim, tighten the drain assembly, and connect the supply lines. PEX piping or copper piping gets a fresh compression fitting or a soldered joint, whichever the house already uses.

We fill the basin, pull the stopper, and watch the drain for two full cycles. We check every connection under the cabinet with a dry paper towel for drips. Then we show you the shutoff valves, the caulk cure time, and how to keep the finish clean. You get a warranty on labor and the fixture.

Sink Installation
STEP 01Call and Scope

You call +19863369053 or book online. We ask for photos of the existing sink, the cabinet underneath, and the countertop opening. Within a few hours you get a written price range and a scheduled window. If you need Pocatello bathroom sink installation open now, we keep same-day slots for emergency swaps.

Tools & methods

Tools and Methods We Use on Every Sink Job

01
✓

Wet saw with diamond blade

Cuts quartz, granite, and porcelain tile cleanly for sink openings and backsplash pieces without chipping the edge.

02
✓

Pipe wrench and basin wrench

Loosens supply nuts and drain fittings under the cabinet, including the tight reach behind a installed basin.

03
✓

Plumber's snake

Clears a clogged drain in the P-trap and branch line before we set the new sink, so the flow is verified.

04
✓

Caulking gun with silicone caulk

Lays a continuous, even bead around the sink rim for a watertight seal that flexes with temperature swings.

05
✓

Laser level and stud finder

Confirms the sink reveal is even and locates framing for vanity anchors and wall-hung basin brackets.

06
✓

Moisture meter

Checks the cabinet floor and surrounding drywall for hidden water damage before we close up the job.

Real results

Before and after.

Cracked Drop-In to Undermount in Old Town
Sink Installation

Cracked Drop-In to Undermount in Old Town

A 1940s home in Old Town had a cracked drop-in sink with a rusted drain and seized shutoffs. Water had seeped under the rim and softened the cabinet floor. The faucet dripped and the drain ran slow.

After: We replaced both shutoffs with quarter-turn ball valves, sistered in a new plywood cabinet base, and set a 20-inch undermount basin in the existing countertop. The drain was snaked and tested twice. Total job time was four hours.

Book this service →
Vessel Sink on New Quartz in Pocatello Creek
Sink Installation

Vessel Sink on New Quartz in Pocatello Creek

A master bath near Pocatello Creek had a builder-grade drop-in and a laminate top that was stained and lifting at the backsplash. The homeowner wanted a vessel sink and a modern look.

After: We templated and cut a new quartz top, drilled the faucet holes, and set a vessel sink with a matching Moen faucet. The reveal was even all the way around and the drain ran fast on the first test. Job took two days including the countertop fabrication.

Book this service →
Rental Turnover Swap in the University Area
Sink Installation

Rental Turnover Swap in the University Area

A landlord near the university needed a sink replaced between tenants on a tight timeline. The old drop-in was chipped, the P-trap was corroded, and the shutoffs would not close.

After: We came out same day, pulled the old sink, replaced the P-trap and both shutoffs, and set a new drop-in basin in the existing top. The unit was rent-ready by 4 p.m. and we sent photos to the owner.

Book this service →
Problems we solve

Sink Problems We Fix for Pocatello Homes

Most sink calls come down to a leak, a clog, or a basin that has simply worn out. Here are the ones we see most in Pocatello, and what happens if you let them ride.

Ask a pro →
01

Water seeping under the sink rim

We pull the sink, scrape the old putty, dry the opening, and reset the basin with 100% silicone caulk. If the cabinet floor is soft, we sister in a new plywood base before the sink goes back. Most rim leaks are fixed in one visit.

↗
02

Standing water that will not drain

We run a plumber's snake through the trap and the branch line, then test the flow with a full basin. If the trap is corroded, we replace it in steel or PVC. We also check the vent, because a blocked vent makes any sink drain slow.

↗
03

Cracked or chipped basin

We replace the basin with a new one in the same footprint whenever possible, so you keep the countertop. If you want to upgrade, we can move you to an undermount sink installation Pocatello Idaho with a fresh cut and a new faucet.

↗
04

Seized shutoff valves

We replace both angle stops with quarter-turn ball valves during the sink install. It adds about 20 minutes and $40 to $80 in parts, and it gives you a shutoff that actually works when you need it.

↗
Proof you can check

Licensed, Insured, and Warrantied

  • State of Idaho Plumbing License · State of Idaho Division of Occupational and Professional Licenses
  • EPA Lead-Safe Certified Firm · U.S. Environmental Protection Agency
  • OSHA 10 and OSHA 30 · Occupational Safety and Health Administration
  • ICC Certified · International Code Council
  • ADA Compliance Certification · Accessibility standards training provider
Good questions

Frequently Asked Questions About Sink Installation

+19863369053 →

Most sink installs in Pocatello run $220 to $780 in 2026, with the average around $420. A straight drop-in swap with existing shutoffs sits at the low end. Undermount sink installation Pocatello Idaho with a countertop cut, new valves, or a new faucet pushes toward the top. We give you a written range before we start, so the number does not move.

A standard swap takes two to four hours. If we are cutting a quartz countertop or replacing seized shutoff valves, plan on four to six hours. We schedule a half-day window and do not stack jobs, so you are not waiting on us to finish somewhere else. The water is back on before we leave.

For most Pocatello bathrooms, a 20-inch undermount basin in vitreous china is the best mix of price, cleaning ease, and durability. If you have a quartz countertop, undermount is the cleanest look. For small vanities, a 17-inch round drop-in works better. Vessel sinks look great but add 5 to 6 inches of height, so check your mirror and faucet reach first.

Yes, in most cases. If your existing cutout matches the new sink's template, we reuse the countertop and just swap the basin and drain. We measure the opening, confirm the reveal, and check that the new clips fit the cabinet. If the cutout is too small or the stone is cracked, we tell you before we start and quote a new top.

Ready when you are

Book Sink Installation Pocatello ID This Week

We give free estimates, show up in the window we promise, and warranty our labor. If your sink is leaking, cracked, or just past its prime, call us and we will get you a straight answer and a firm price.

Get My Free Estimate +19863369053 →
Request an appointment

Contact our Pocatello bathroom crew

Call us or send a message and we will get back to you the same business day. We schedule estimates Monday through Friday and can usually get to a Pocatello address within a few days. Tell us what is going on with the bathroom and we will tell you what it takes to fix it.

Call anytime+19863369053Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
↗
Emergency?Call now